Zhejiang crushing equipment Lithium battery circuit board recycling product supplier--Maoxin Machinery

→Graphical Introduction Information of Lithium battery crushing and recycling equipment←

    Make your factory work easier, not harder,Maoxin Machinery reminds Zhejiang friends to understand this information:
The scrapped lithium battery is sent by conveyor into a shredder for shredding, and the shredded material is sent through the conveyor to the two-stage multi-tool crusher for secondary crushing, and the materials after secondary crushing enter the conveyor at the same time, magnetic separation equipment can be set up to separate the iron in the material. The material after separation is sent to the air separator by the conveyor, the separator paper in the positive and negative electrodes is separated by the induced draft fan and the cyclone feeder, and the positive and negative electrode pieces after separation are entered into the three-level grinder for fine crushing, and the material is crushed to about 20 mesh. The crushed material is filtered by the negative pressure system into the cyclone separator for dust filtration, and through two air separation, so that different density of substances are stratified, and then the positive and negative electrode materials and copper, aluminum, nickel and other materials, and all the ultrafine dust is collected by the negative pressure system into the pulse dust collector. The exhaust gas of the filter * will continue to be sent by the negative pressure system to the exhaust gas treatment equipment for air purification, so that it can meet the national emission standards and then be discharged at high altitude.We're happy to answer questions or help you with returns.Hi,Zhejiang friends,Please fill out the form if you need assistance.